Varytec LED Profile 150W 3200K, Руководство пользователя

Страница: 29 / 40

Press [MENU] . Press [UP] or [DOWN] repeatedly until the display shows ‘Addr’ . Use [UP] or
[DOWN] to select the sub menu item ‘ADDR’ and confirm with [ENTER] . Now you can set the
number of the first DMX channel to be used by the device (DMX address). Use [UP] or [DOWN]
to select a value between 1 and 512.
Confirm by pressing
[ENTER] . Use [MENU] to return to the parent menu.
To return to the parent menu without changes, press [MENU] without prior confirmation.
Make sure that this number matches the configuration of your DMX controller.
Press [MENU] . Press [UP] or [DOWN] repeatedly until the display shows ‘L1xx’ . Press [ENTER] .
Use [UP] or [DOWN] to select a value between ‘L100’ (lampe off) and ‘L115’ (full brightness).
This setting takes effect only when the device is not operated under DMX control. When the
display shows the desired value, press [ENTER] to confirm the selection and then [MENU] to
return to the parent menu. To return to the parent menu without changes, press [MENU]
without prior confirmation.
DMX address
Dimmer setting
Operating
LED Profile 150W 3200K
29
LED spotlight