Varytec LED Pad 7 7x10W 6in1 RGBWAUV, Руководство пользователя

Страница: 39 / 56

Press [MENU] . Press [UP] / [DOWN] repeatedly until the display shows ‘SLAv’ . Press [ENTER] . The
display now shows ‘SLA’ . The device is now configured as slave and follows the settings of the
master device to which it is connected. In the other operating modes, the device automatically
operates as master. Press [MENU] to return to the parent menu. This setting is only relevant if
the device is not controlled via DMX.
Press [MENU] . Press [UP] / [DOWN] repeatedly until the display shows ‘rEno’ . With [UP] /
[DOWN] you can now either enable (display shows ‘on’ ) or disable (display shows ‘oFF’ ) the
remote control function. When the display shows the desired value press [ENTER] to confirm
the selection and then [MENU] to return to the parent menu. To return to the parent menu
without making changes, press [MENU] .
Press [MENU] . Press [UP] / [DOWN] repeatedly until the display shows ‘tenP’ . Press [ENTER] . The
display shows the current operating temperature.
Press [MENU] . Press [UP] / [DOWN] repeatedly until the display shows ‘Uer’ . Press [ENTER] . The
display now shows the current software version with ‘vXX’ . To return to the parent menu,
press [MENU] .
Operating mode ‘Slave’
Remote control
Temperature
Software version display
Operating
LED Pad 7 7x10W 6in1 RGBWAUV
39
LED PAR