Varytec LED Accu Pad 7, Руководство пользователя

Страница: 34 / 52

Press [MENU] . Press or repeatedly until the display shows ‘SLAV’ . Press [ENTER] . ‘SLA’ is
flashing in the display. The device is now configured as slave and follows the settings of the
master device to which it is connected. Press [MENU] to return to the parent menu. This setting
is only relevant if the device is not controlled via DMX.
Press [MENU] . Press or repeatedly until the display shows ‘Soud’ . Press [ENTER] . Now use
or to select one of the two sound modes ‘Sou1’ or ‘Sou2’ . Press [ENTER] . Use or to select
a value for the microphone sensitivity between 0 and 99 (display shows ‘Se00’ … ‘Se99’ ). When
the display shows the desired value press [ENTER] to confirm the selection and then [MENU] to
return to the parent menu. To return to the parent menu without making changes, press
[MENU] .
Press [MENU] . Press or repeatedly until the display shows ‘ALLC’ . Press [ENTER] . Use or
to select a value for the overall brightness of all colours between 000 and 255. Press [ENTER] .
Now you can use or to select the colours red ( ‘r’ ), green ( ‘g’ ), blue ( ‘b’ ), white ( ‘U’ ), amber
( ‘A’ ) and ultraviolet ( ‘L’ ), call them up with [ENTER] and then use or to set the desired
value between ‘000’ … ‘255’ . When the display shows the desired value press [ENTER] to con‐
firm the selection and then [MENU] to return to the parent menu. To return to the parent menu
without making changes, press [MENU] .
Operating mode ‘Slave’
Sound control
Colour setting
Operating
battery spot light
34