8 / 10
SLav
Master Slave Mode
1. Push the UP/DOWN buttons until the display shows SLav.
2. Push
ENTER
3. Now the display shows now Sla, this confirms the salve mode.
4. The slave mode reacts to Automatic programs, sound to light mode odr chaser mode of the
master item. To do so the master doesn’t has to be set up special. For a master slave
configuration, just connect all the desired items by dmx cables.
Ver
Software Version auslesen
1. Push the UP/DOWN buttons until the display shows SLNd.
2. Push
ENTER
3. Now the display shows the actual software version
5. Master Slave configuration
If you want to daisy chain and control more than one item you can use the Master Slave Mode. To do
so you have to daisy chain your items as you would do when you want to set up a dmx chain. You can
use max 16 items for this mode. The first item in line is the master and the other items will react
according to him. The master item can be set up to the desired program or mode and the others will
follow. The slave items should be set up as follows.
1. Push the Menu button as often until you see SLav in the display. Push Enter to confirm.
2. No choose the desired Slave mode is confirmed.
3. The slave item will now react according to the master.
6. Sound to Light
-
Set up the sound to light mode to ON as described above.
-
Now the item will react according to the sensitivity of the mic.
-
This option can be used with the master slave mode as well.
