Varytec Colors SonicStrobe, Руководство пользователя, Страница: 31 / 56

Sound control mode can only be activated when the unit is operating in stand alone mode or
as master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX. In this operating mode, the device responds to acoustic pulses which are
recorded by the integrated microphone.
n Briefly press [MENU] repeatedly until the display shows ‘SoUn’ . Confirm with [ENTER] .
Use and to select between ‘SoXX’ and ‘SeXX’ . Confirm with [ENTER] .
n
Use and to select the desired show programme ( ‘So00’ … ‘So16’ ) or specify the sensi‐
tivity for the built-in microphone for sound control in a range from ‘SE00’ (low sensitivity)
… ‘SE99’ (high sensitivity). Confirm with [ENTER] .
Auto mode can only be activated when the unit is operating in stand alone mode or as master
in a master / slave combination. This setting is only relevant if the device is not controlled via
DMX. In auto mode, 17 different show programmes are available, which run with adjustable
speed.
n
Press [MENU] repeatedly until the display shows ‘Auto’ . Confirm with [ENTER] .
Use and to select the desired show programme ( ‘Au00’ … ‘Au16’ ) and confirm with
[ENTER] . The display shows ‘SP’ .
n
Use and to set the running speed of the programme in a range from ‘SP00’ (slow) …
‘SP99’ (fast) and confirm with [ENTER] .
Operating mode ‘Sound control’
‘Automatic mode’
Operating
Colors SonicStrobe
31
stroboscope