Varytec BAT.PAR 3 RGBW, Руководство пользователя, Страница: 33 / 56

Press [MENU] , [UP] or [DOWN] repeatedly until the display shows ‘Soun’ . Confirm with [ENTER] .
Use [UP] and [DOWN] to select the desired mode ‘Sou1’ or ‘Sou2’ . Confirm with [ENTER] .
Now you can adjust the sensitivity of the built-in microphone for sound control. Use [Up] and
[Down] to select a value between 0 (low sensitivity) and 9 (high sensitivity), display shows
‘Se0’ … ‘Se9’ .
Press [MENU] , [UP] or [DOWN] repeatedly until the display shows ‘Stat’ . Confirm with [ENTER] .
Use [UP] and [DOWN] to select the fixed colour for which the dimmer setting should be
adjusted: Red, green, blue, white and specify the flash frequency for the strobe effect.
Adjust the setting as desired in a range from 0 … 255 (0 % to 100 %) and confirm with
[ENTER]
to switch to the next colour in the menu.
Press [MENU] , [UP] or [DOWN] repeatedly until the display shows ‘Colo’ . Confirm with [ENTER] .
Use [UP] and [DOWN] to select a constant colour in a range from ‘Col1’ … ‘Col51’ . Confirm
with [ENTER] .
Press [MENU] , [UP] or [DOWN] repeatedly until the display shows ‘Auto’ . Confirm with [ENTER] .
Sound control
Dimmer settings
Constant colour
Operating mode Auto
Operating
BAT.PAR 3 RGBW
33
LED spotlight