VarTech Systems VTPC190VR, Руководство пользователя, Страница: 3 / 33

19.0” Enclosed VESA Mount PC User’s Guide Page 3
Safety Instructions

Read the Safety Instructions carefully and keep it for use later.

The chassis metalwork of the module must be installed properly to the
main earthing termination for Class 1 equipment.

Care must be exercised in the application of the system to prevent
overheating. Ensure that the ambient temperature around the system
does not exceed 60°C and provide adequate means of ventilation to
achieve this.

When cleaning cut off the electrical supply at all times. Never use liquid or
aerosol detergent, use a soft damp cloth instead.

Never insert anything metallic into the enclosure opening. This may create
an electric shock hazard or hazard from rotating fan blades.

To avoid electric shock, never touch the inside of the system. There are
no user adjustable components inside, only a qualified technician should
open the system’s case.

Fins on the rear system enclosure are to allow for cooling. To prevent
overheating, these fins should not be blocked or covered.

If the system does not operate normally – in particular, if there are any
unusual sounds or smells coming from it – disconnect it immediately.

Do not put pressure on the LCD panel screen because it is very fragile.

Always handle the system with care when moving it.

Take care that the system is disposed of correctly at the end of its life. If in
doubt refer to your local ordinances or regulations for proper disposal.

A socket-outlet shall be installed near the equipment and shall be easily
accessible.
Cleaning the LCD monitor
To clean the LCD panel:

Wipe the screen gently with a clean lens brush made of camel hair, or a
soft, clean, lint free cloth. This is to remove dust and other particles
without scratching the LCD panel.

If it is still not clean, then wipe with a damp lint free cloth and blow on it to
dry.

Desirable cleaners are water, IPA (Isopropyl Alcohol) or Hexane.