15.0 Fully-Enclosed VESA Mount PC
486-0007-01-00
5
Installation of Your Fully-Enclosed VESA Mount PC
Packaged with each carton will be:
1 - VTPC150VA / VSA
1 - AC Power Cable
1 – LAN Male Cable
2 – RS232 Male Cables
3 – USB Cables
1 - Users Guide (Printed or on CD)
BEFORE MAKING ANY CONNECTIONS OR APPLYING POWER,
FIRST READ THROUGH THE ENTIRE MANUAL
Mounting Procedure
VESA Enclosure Mounting Procedure:
1- Install the enclosure to a 100mm VESA mount pedestal.
2- Secure the enclosure using the screws and lock washers.
3- Tighten all mounting hardware to a torque of 15 inch-pounds.
ATTENTION:
Mounting hardware must be tightened to a torque of 15 inch-pounds to provide a
proper panel mount and avoid potential damage. Vartech Systems assumes no responsibility for
water or chemical damage to the monitor or other equipment within the enclosure due to
improper installation.
4- Attach the power and system cables to the bottom side of the enclosure if you have not
already done so.
Connections to the Enclosed PC
Bottom Rear View
- Connector Panel -
