19.0 Enclosed LCD
486-0021-00-00
7
Connections to the Enclosed LCD:
Power Connection (Power In)
The Enclosed LCD includes an AC line cord which is 10ft long. The power input receptacle is
located on a panel mounted to the support arm of the system.
VGA Port Connection (VGA)
The Enclosed LCD is supplied with a 15-pin D-Shell connector. The cable is located on a panel
mounted to the support arm of the system.
Touch Screen Connection (TOUCH)
The Enclosed LCD is supplied with a 9-pin D-Shell serial connector configured for resistive
touch screen. The cable is located on a panel mounted to the support arm of the system.
LCD Monitor Warm-up Time
All LCD monitors need time to become thermally stable the first time you turn them on.
Therefore, to achieve more accurate adjustments for parameters, allow the LCD monitor to
warm (be on) for at least 20 minutes before making any screen adjustments.
Maintenance
The Enclosed LCD is designed to provide optimum service and performance with minimal
maintenance including the occasional external cleaning. For cleaning the Enclosed LCD
enclosure follow the suggested guidelines.
General –
NEVER use abrasive cleaners or solvent-based cleaners!! Use a clean soft cloth.
The Enclosed LCD should only be opened and serviced by a qualified technician. Keep the area
around the Enclosed VESA Mount PC clear and free of excessive dirt or other contaminants.
