INSTALLATION
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage.
Do not use this display near water such as near a sink, in a wet location where there is
standing water. Displays are provided with ventilation openings in the cabinet to allow the
release of heat generated during operation. If these openings are blocked, built-up heat can
cause failures which may result in a fire hazard.
Therefore, NEVER:
♦
Block any ventilation slots.
♦
Place the display in a built-in enclosure unless proper ventilation is provided.
♦
Cover the openings with cloth or other material.
♦
Place the display near or over a heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
3
Section
2
DISPLAY SETUP
DISPLAY SETUP
2.1
R
EPACKING
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
2.2
