CLEANING
Cleaning and Maintenance
7
Section
Warning
If you dropped any material or liquid such as water onto the monitor when cleaning, unplug
the power cable immediately and contact your dealer or the nearest service center. Always
make sure your hands are dry when unplugging the power cable.
Caution
˙
For safety reasons, turn-off the power switch and unplug the monitor before cleaning.
˙
Do not scratch or rub the screen with a hard object.
˙
Never use any of the following solvents on the LCD Touch Monitor. Such harsh chemicals
may cause damage to the cabinet and the touch sensor.
Thinner Spray-type cleaner, Benzene, Wax, Abrasive cleaner, Acid or Alkaline solvent.
Cabinet
Remove dirt with a lightly moistened cloth and a mild solvent detergent. Then wipe the cabi-
net with a soft dry cloth.
Display Area (Touch Sensor)
•
Periodic cleaning with a soft dry cloth is recommended. Non-abrasive household window-
type cleaners are recommended.
•
Do not use tissue to clean the display area. It may scratch or dull the LCD screen.
POWER MANAGEMENT
This LCD Touch Monitor complies with the VESA DPMS (version 1.0p) power management
specification. DPMS provides four types of power saving modes by detecting the horizontal or
vertical sync signal. As well, the computer graphic card also needs to be DPMS compliant to
utilize these modes.
Item
DPMS
Mode
Display
Power LED
Power Con-
sumption
Recovery
Time
H-sync
V-sync
1
On
Normal
Green
Normal
---
On
On
2
Stand By
No Display
Amber
≦
5W
3 sec
< 10 KHz
On
3
Suspend
No Display
Amber
≦
5W
3 sec
On
< 10 Hz
4
Off
No Display
Amber
≦
5W
3 sec
< 10 KHz
< 10 Hz
14
VT150 High Bright User Guide 150-085
