Varta V-CDR301US, Инструкция по эксплуатации

Страница: 6 / 17

6
Instruction manual
www.varta-electronics.ru
general operation
• Insert a CD as described.
• Pres FUNCTION button repeatedly to se
-
lect the CD mode. The display will show CD.
• The CD will spin momentarily and then
the display will show the total number of t
racks of the disc.
• At any time during playback, press
button to pause operation of the unit. Press
this button to resume operation at the same
track and position.
• At anytime during playback, press
button to stop operation of the set.
• At anytime during playback, press /
buttons to ski p backwards or forwards by
one track.
• At anytime during playback, press and
hold / buttons to fast-reverse or fast-
forward the currently playing track. Release
the button to resume normal playback.
MP3 disc playback
• All operations with MP3 discs are the
same as CD disc operations except as de-
scribed below in this paragraph.
• If your disc has folders, the display will
show the total folder number and total track
number.
• If your MP3 disc has folders, you can
select a folder to playback by pressing repeat-
edly FOLDER PRESET UP/DOWN buttons. Each
time you press the button, the player ski ps to
the first song in the previous or next folder.
• If the MP3 files contain ID3 tag infor -
mation of compatible format, press ID3 button
on the RC to display the ID3 tag information.
Repeat playback
At any time during playback, press PLAY
MODE button once to repeat the current track.
Press the button again to repeat all tracks in
the current folder (if the disc has folders).
Press the button again to repeat all tracks on
the disc. Press the button again for random
playback of all tracks. To cancel repeat play-
back, press this button once again.
Program mode
• The CD player can be programmed to
play any sequence of up to 40 tracks.
• Always press press button before
starting the programming.
• Press MEMORY/CLOCK button on the
unit or CLOCK ADJ./MEMORY button on the
RC, the display will show PROG and PR01, to
indicate that the set is now in the memory pro-
gramming mode, at memory position No.1.
• Press / buttons to select the
track number you wish to be stored in the first
memory program position, and press MEM-
ORY/CLOCK button on the unit or CLOCK
ADJ./MEMORY button on the RC to confirm
your selection.
• Repeat the previous 2 steps, each time
selecting any track number to be stored in the
successive memory positions.
• After a maximum of songs (or less)
have been selected as described above, press
button to start play back of the saved se-
quence in the program memory.
• To clear the entire program stored in the
memory, press button twice, open the disc
compartment door or switch off the unit.
USB/SD/MMC operations
• Insert a USB drive into the USB socket
or an SD/MMC memory card into the card
socket.
• Press FUNCTION button repeatedly to
select USB or Card mode. The display will
show USB or CARD accordingly.
• All the other operations are the same
as with CD/MP3 disc playback.
general notes on USB/SD/MMC
Never unplug USB-drives or memory cards
from the unit during playback of songs from
this media. Always press button first before
unplugging USB or memory card, to prevent
damage to your files or memory devices.
Although this product is fully compat-
ible with USB 1.1 standard, a small percentage
(about 5%) of USB flash drives might not be
readable, due to manufacturers’ non-com-
pliance with the official standards. Maximum