10
Operation
www.varta-electronics.ru
GEnERal OPERaTIOns
Resetting the unit
Operating the unit for the first time or af-
ter replacing the car battery, you must reset
the unit.
Press REL button on the panel to open the
panel and press RESET button to restore the
unit to its original factory settings.
Power on/off
Press any button (except REL) to turn on
the unit. Press and hold POWER button to
switch the unit off.
After the unit is off, the volume level
and radio current settings will be memorized,
and when you turn the unit on it will resume
the stored status you previously set.
Volume control
Rotate VOL knob on the panel or press
V+/V- buttons on the RC to adjust the volume
level.
setting the sound parameters
Press repeatedly SEL button on the panel
or on the RC to select an audio setting: VOL
(volume) => BAS (bass) => TRE (treble) =>
BAL (balance) => FAD (fader). Rotate VOL
knob on the panel or press V+/- buttons on
the RC to adjust each setting.
• If the unit is turned off, all the set
-
tings of each mode will be saved.
• If cutting off battery power or resetting
the unit, all the settings will return to factory
default settings.
• When DSP is set to any mode, Balance
and Treble are not adjustable.
• If you don’t adjust the setting within
several seconds after selecting the desired
setting, the unit will automatically return to the
current mode being displayed.
setting other features
Press and hold SEL button on the panel or
on the RC, and then shortly press this button
repeatedly to select a setting. Rotate VOL knob
on the panel or press V+/- buttons on the RC
to adjust each setting.
INVOL: Set default volume level when the
unit is turned on.
CLOCK: you can set the clock. Rotate VOL
knob clockwise to set minutes; rotate VOL
knob counterclockwise to set hours.
24 HOUR: choose 24 hour clock display
mode or 12 hour clock display mode.
LOUD ON/OFF: Enable LOUD ON (Default
is LOUD OFF).
BEEP ON/OFF: if BEEP on, pressing any
key will make a beep sound.
DSP: Choose intended sound effect in the
sequence: POP => ROCK => CLASS => FLAT
=> NONE.
sound mute
Press POWER button to turn the sound
off. Press it again or rotate VOL knob on the
panel or press V+/- buttons on the RC to re-
sume sound.
Mode select
Press MODE button repeatedly to select:
TUNER => CD => SD => USB => AUX.
CD, SD and USB modes are only avail-
able if corresponding media device is in the
unit.
Display
Press DIS button repeatedly to see cur-
rent tuning information and time. Sequence
of the menu: Clock => PTY => PS => Radio
frequency.
aUX in jack
AUX-in jack is intended for connecting an
external audio or video equi pment to amplify
the sound. If connection is made correctly,
the audio signal from the external source will
be translated through the acoustics of the
head unit. This enables to adjust the volume
and quality of the sounding. For example, you
can connect an MP3-player to listen to tracks
using the car acoustic system.