Varta V-AVM711D, Инструкция по эксплуатации

Страница: 21 / 120

V-AVM711D
21
Presetting stations manually
Method 1: Press the number buttons on the RC.
Method 2: Press the MEM button on the screen to open the station preset menu. Then press one of the 6 buttons of
the menu. The menu will be closed automatically. If you want to exit, press EXIT button.
Notes: After manual presetting, the previous stations frequency will be overwritten. Number buttons 1 to 6
corresponds to station P1 to P6. For each band, P1 to P6 can store 1 station.
Recall the preset stations
Press the corresponding number button on the RC or touch an onscreen preset button to select the corresponding
stored station.
Preview scan
Open the second window by pressing 1/2 button. Press SCN button on the RC or touch the PS button on the screen.
Preview scan searching is such a process that the searching pauses when a station is received and then played for 10
seconds. After being played, the unit continues the process until the whole band is detected.
Note: To stop preview scan, repeat the operation above again.
Local radio station searching
Press the LOC button on the screen to open pr close LOCAL function. DX (distance) seeking mode is contrary to
LOC mode. You can receive more stations with this seeking mode. When LOCAL seeking is on, only radio stations
with strong radio signal could be received.
Notes: When the local radio station searching is on, the indicator light “LOC” lights up; whereas the light goes off.
The unit will switch to distant seeking mode after LOCAL seeking is closed.