Varta 56650 764 098, Техническое руководство

Страница: 17 / 33

18
Important : The module connector will ensure correct position of the modules and add stability. The
end user is responsible for creating sufficient stability of the battery system within the device with
respect to the requirements of the application and variation of battery systems which can be
assembled. In some cases it is necessary to consider that additional support of the module structure
should be considered in the final design of the application.
For removal of the module connector loosen the screw and remove the module connector. If the
connector is stuck, use a screwdriver for pulling it out of the recess via the side opening in the
connector.
The modules can be connected in z1 (Easy Blade) and z3 (Easy Block) directions. You can stack the
batteries via the design features on the bottom and on the top of each module. (see below picture).
Please note the stacking features are only for orientation and guidance not for fixation. The user is
responsible, to make sure that the module can´t move during operation.