Varta 56650 764 098, Техническое руководство

Страница: 21 / 33

22
After Wake-Up the battery is ready for discharge. Charging is only possible if an approved VARTA
CAN charger is connected, or a suitable CAN-charger has been developed under the VARTA protocol.
Step 2: Check Battery Status

Method 1: Check if the green LED on all modules is solid green.

Method 2: Read the Battery Status Register via CAN.
If all modules are activated, continue with Step 3.
Step 3: Discharging or Charging

Discharging: Discharging is going to start once a load is connected to the system.
Discharging is possible without CAN communication to the device.

Charging: Connect a VARTA approved CAN charger to the system. Charging starts
once there is a CAN communication between Master and charger.
7.5 Shut-down

Method 1: Push the Button on a module twice quickly within one second (doesn´t
matter which module).

Method 2: Switch off the external ON / OFF switch, which is connected to the ON /
OFF pin in the CAN connector

Method 3 (only applies for single modules): If no charging / discharging below a set
threshold (5A default) is detected within 3h, the single module shuts-down
automatically. This 3h value and the current threshold is a default and can be
changed in the CAN device settings. For multi-module systems, there is no auto shut-
down.
8 CAN Communication
The CAN Protocol Overview can be found on page 25.
There is no customized Service software available. VARTA recommends the standard CANopen
Software for debugging / read-out of CAN Objects, which is CAN Device Explorer from Emotas
( https://www.emotas.de/produkte/canopen-device-explorer )
CAN EDS file is available on our website to preconfigure the CAN Device Explorer Tool.
https://www.varta-storage.com/de/produkte/power/asb
9 Easy Blade - Cooling concept
The Easy Blade has two radial fans to cool the battery in case of increasing temperature. You can see
in below spreadsheet the performance of the fans, which depends on the temperature inside the
battery. There are different threshold for charging and discharging.