14
TIME OF DAY OPERATION
If the unit was configured as a time of day display (see “Parameter 0: Timer Function” on page 5) the
following parameters must also be set to the specified value before the timer can be used as a time of
day display:
Parameter 1 must be set to “5”
(see “Parameter 1: Number of Timer Digits” on page 5)
Parameter 2 must be set to “4”
(see “Parameter 2: Number of Clock Digits” on page 5)
Parameter 3 must be set to “5”
(see “Parameter 3: First Clock Digit Value” on page 6)
Parameter 6 can be set to either “0” or “1”
(see Parameter 6: 12-hour/24-hour Clock Format on page 6)
To set the time of day:
1.
Press and hold the
SET CLOCK
key until the display clears.
2.
Use the number keys on the handheld controller to enter the time of day in either a 12-hour
or 24-hour clock format, depending on the value you set for parameter 6 in configuration
mode.
3.
Press the
NEXT
key to save the entered time and start the clock.
