VARO Powerplus XQ POWXQG6060, Руководство пользователя

Страница: 10 / 14

POWXQG6060
EN
Copyright © 2015 VARO
P a g e | 10
www.varo.com
10.6 Cutting with blades
AVOID KICKOUT
Kickout refers to the reaction of a moving blade if it contacts a strong tree, brush or a solid
object. The force that results violently pushes the blade away in an arc. Kickout may cause
loss of control resulting in injury to the operator or bystanders.
Do not use a blade near a chain link fence, metal stakes, landscape borders or building
foundations.
Do not cut with dull, cracked or damaged metal blade. Before cutting growth,
inspect for obstructions such as boulders, metal stakes or strands of wire
from broken fences. If an obstruction can not be removed, mark its location
so that you can avoid it with the blade. Rocks and metal will dull or damage a
blade. Wire can catch on the blade head and flap around or be thrown into the
air.
Do not use a brush cutter for cutting trees.
11 MAINTENANCE
11.1 Air filter
CAUTION: NEVER operate trimmer without the air filter or dust and dirt will be
sucked into the engine and damage it. The air filter must be kept clean. If it
becomes damaged, install a new filter.

Accumulated dust in the air filter will reduce engine efficiency, increase fuel consumption
and allow abrasive particles to pass into the engine. Remove the air filter as often as
necessary to maintain in a clean condition.

Light surface dust can readily be removed by tapping the filter. Heavy deposits should be
washed out in soap water.

Remove filter cover by loosening air filter cover knob.
NOTE: Replace filter if frayed, torn, damaged or if it cannot be cleaned.
11.2 Fuel cap / fuel filter
CAUTION: Remove fuel from unit and store in approved container before
starting this procedure. Open fuel cap slowly to release any pressure which
may have formed in fuel tank.
Keep vent on fuel cap free of debris.

Lift fuel line and filter out of tank. A steel wire with a hook or a paper clip works well.

Pull off fuel filter with a twisting motion.

Replace the fuel filter.
NOTE: Never operate the tool without the fuel filter. Internal engine damage
could result and / or disturb a good operation.