POWXG4037
EN
Copyright © 2019 VARO
P a g e
|
5
www.varo.com
▪
Wear protective garb and goggles. Wearing protective garb such as a dust mask, non-slip
footwear, protective gloves, a helmet and/or hearing protection (depending on the type
and application of the electrical device concerned) reduces the risk of injury.
▪
When performing work that generates dust, wear a breathing mask.
▪
Each time you use the blower, check the integrity of the device's power cord and your own
extension cord. The device should only be operated when its accessories are in perfect
working order. Any damaged or defective components should be repaired immediately by
a qualified technician.
▪
Under no circumstances should the blower be operated while you are wearing damaged
protective garb, shielding or without basic safely equipment such as a deflection device or
collection bag.
▪
Only extension cords that are rated for outdoor use should be used outdoors. Any
extension cord used should measure a minimum of 1.5 mm across.
▪
All plug-in connections should have an earthing contact and water-spray shielding.
6 OPERATING THE DEVICE
▪
Make sure the power cord is kept behind and away from the device while you work.
▪
If the power cord or extension cord are damaged while you work, unplug the blower
immediately. Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
▪
Never use the power cord as a handle to lift or carry the device.
▪
Always unplug the device under the following circumstances:
o
When the blower is not in use, is being carried/transported, or is left unattended.
o
While examining, cleaning or unclogging the device.
o
When cleaning the device, performing maintenance on it, or attaching accessories
to it.
o
If the device strikes a foreign object or begins vibrating abnormally.
▪
Use the blower in daylight or with adequate illumination.
▪
Bear in mind that the force generated by an electrical device can make you lose your
balance. Therefore, make sure that your feet are firmly planted and that your body is well
balanced when you are operating the device.
▪
Never operate the blower on damp or wet grass.
▪
Using the blower on sloping areas: Do not work in areas with unduly steep slopes.
▪
Use the blower as follows when working on slopes:
▪
Always position yourself horizontally to the slope and make sure your feet are firmly
planted. Exercise particular caution whenever you change directions while working on a
slope.
▪
Walk at a measured pace while operating the blower. DO NOT RUN.
▪
Keep the air outlet unobstructed and clean at all times.
▪
Never direct the suction/blown air opening toward persons or animals.
7 MAINTENANCE AND STORAGE
▪
Make sure that all screws, nuts and bolts are tight; doing this will ensure that the blower is
safe to operate.
▪
Check the collection bag regularly for signs of wear and/or distortion.
▪
Make sure the correct type of replacement cutting blades are used.
▪
For reasons of safety, any worn or damaged component should be replaced or repaired
immediately by a qualified technician.
▪
When not in use, the blower should be stored in a dry location that is inaccessible to
children.
