POWX301
EN
Copyright © 2020 VARO
P a g e
|
5
www.varo.com
▪
You can now clean the stove, fireplace or barbecue by using the nozzle. If the nozzle
becomes blocked by a piece of charcoal or similar, switch off the ash vacuum cleaner.
Carefully tap the nozzle against the inside of the stove or fireplace to remove the object.
Note: Before use the ash vacuum, make sure all connectors and the dust
filter subassembly (10) is tightly fastened. The container and dust filter
must be completely dry.
8 OPERATION
▪
Before you start the appliance, make sure that the filter is in the position.
▪
Unwind the power cord.
▪
Plug the appliance and switch on.
▪
Unplug the appliance after use
≤
60
℃
!!! For use with cold ashes only!
9 CLEANING AND MAINTENANCE
Clean the filter before/after each use
▪
If the suction strength deteriorates during use, turn off the ash vacuum cleaner.
▪
As soon as the suction force reduces, empty the contents of the container.
▪
Remove the suction hose (7) and loosen the cover with the lock tabs.
▪
Hold the dust filter and loosen by hand
▪
Wash the dust filter by clean and warm water.
▪
Dry the dust filter before re-use.
Caution: Do not use cleaning agents to clean the plastic parts of the tool. A
mild detergent on a damp cloth is recommended. Water must never come
into contact with the tool.
10 TROUBLE SHOOTING
PROBLEM
CAUSE
ACTION
Motor does not start
-Power cord not firmly
plugged into outlet.
-Outlet damaged.
-Cleaner not switched on.
-Plug unit firmly.
-Check the Outlet.
-Switch on the appliance
Suction power is weaker
-Unit clogged
-Dust filter needs cleaning
-Dust container not in
position.
-Filter blocked
-Remove the blockage.
-Clean the dust filter.
-Attach the dust container
again to the cleaner.
-Clean the filter
