POWEG8010
EN
Copyright © 2018 VARO
P a g e
|
12
www.varo.com
15 STORAGE
Caution! Not following the following instructions may lead to deposits in
the carburetor and to permanent damage.
▪
Execute all the recommendations concerning maintenance specified in the "Maintenance
and care" chapter.
▪
Clean the engine outside surface, the shaft housing, the protective cover, and the string
attachment.
▪
Drain fuel from the tank.
▪
After fuel drainage, start the engine.
▪
Let the engine run at idle until it stops. Asa result of that, no fuel will remain in the
carburetor.
▪
Let the engine cool off (for approximately 5 minutes).
▪
Remove the spark plug with the spark plug key.
▪
Pour a little bit of 2-cycle engine oil into the combustion chamber. Pull the starter rope grip
a few times - oil will spread. Replace the spark plug.
▪
Store the unit in a cool and dry place, which is remote from sources of fire like oil burners,
water heaters etc.
16 RESETTING IN OPERATION
▪
Remove the spark plug and pull the starter rope fast, in order to remove oil from the
combustion chamber.
▪
Clean the sparkplug or replace it, if necessary.
▪
Prepare the unit for resetting in operation and fill the tank with the correct mixture of fuel
and oil (40:1).
17 WARRANTY
▪
This product is warranted as provided by law for a 24 -month period effective from the
date of purchase by the first user.
▪
This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
▪
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
▪
We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
▪
Repairs may only be carried out by an authorized customer service centre for Powerplus
tools.
▪
You can always obtain more information at the number 00 32 3 292 92 90.
▪
Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
▪
At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.
▪
Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike,
erroneous net voltage. This list is not exhaustive.
▪
Acceptance of claims under warranty can never lead to the prolongation of the warranty
period nor commencement of a new warranty period in case of a device replacement.
