POWEG4500
EN
Copyright © 2017 VARO
P a g e
|
9
www.varo.com
If the machine should happen to fail despite the care taken in manufacturing and testing,
repair should be carried out by our technical department.
9.1
Blade maintenance
Always clean the cutting blades after operation and lubricate with oil.
During longer cutting jobs, we recommend periodically lubricating the cutting blade.
Visually check the condition of the cutting edges of the cutting blade.
Ensure that the blade is covered with the blade guard supplied when not in use.
9.2
Cleaning/ storage
Clean the exterior of the machine thoroughly using a soft brush and cloth. Do not use water,
solvents or polishes. Remove all debris, especially from the ventilation slots. Store the
machine in a secure dry place out of reach of children. Do not place other objects on top of the
machine.
9.3
Service department
Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
10 TECHNICAL DATA
Type
POWEG4500
Rotation speed
1100 min
-1
Rated voltage DC
7.2 V
Battery capacity
1500 mAh
Battery type
Li-ion
Knife distance
6 mm
Charging time
3-5 h
Soft grip
Yes
Hedge trimmer: blade length
120 mm
Hedge trimmer: cutting width
6 mm
Grass shear: blade width
83 mm
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
62 dB(A)
Acoustic power level LwA
90 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
2.2 m/s²
K = 1.5 m/s²
12 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).