POWDPG7531
EN
Copyright © 2020 VARO
P a g e
|
3
www.varo.com
Wear safety glasses and ear
protection.
Keep hands away from
blades, Don’t touch the blades
when starting or while
operating the unit.
Never operate the machine
in the rain or in damp or wet
condition. Moisture is a
shock hazard.
Wear a mask In dusty
conditions
"Class II - The machine is
double insulated; Earthing
wire is therefore not
necessary (only for charger)
In accordance with essential
requirements of the European
directive(s).
Do not expose charger and
battery pack to water
Do not incinerate battery pack
or charger
Ambient temperature 40°C
max. (only for battery)
Use battery and charger only
in closed rooms
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and all instructions. Failure to follow all warnings
and instructions may result in electric shock, fire and/or serious injury. Save
all warnings and instructions for future reference. The term "power tool" in
the warnings refers to your mains operated (corded) power tool or battery
operated (cordless) power tool.
5.1
Work area
▪
Keep work area clean and well lit. Cluttered and dark areas invite accidents.
▪
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
▪
Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
5.2
Electrical safety
▪
Always check that the power supply corresponds to the voltage on the rating plate.
▪
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
▪
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
▪
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
▪
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
