background image

 

POWC10200 

EN

 

Copyright © 2021 VARO 

P a g e

 | 

5

  

www.varo.com 

7.3 

Depth gauge 

The depth stop is used to limited the maximum drilling depth. 

 

Loosen the side grip (8). 

 

Insert the depth stop (2) in the hole in the holder of the side grip. 

 

Adjust the depth stop to the required drilling depth. 

 

Tighten the side grip firmly. 

8  OPERATION 

8.1 

Selecting the operation mode 

Select the required operating mode before use (drilling or hammer drilling). 

 

For drilling in wood, metal, plastics and soft stone, push the switch (3) to the drill position. 

 

For drilling in concrete or hard stone, push  the switch (3) to the hammer position. 

8.2 

Forward / reverse lever 

 

To select forward position (right rotation), push the forward / reverse lever to the right (R). 

 

To select the reverse position (left rotation), push the forward / reverse lever to the left (L). 

8.3 

Variable speed 

This tool has a speed control dial (6) that delive

rs higher speed by turning to the “+” position 

and delivers lower speed by turning to the “-“ position. 

8.4 

Switching ON and OFF 

Connect the tool to the power supply. 
To start the machine, you squeeze the ON / OFF switch (4). 
To stop the machine, you release the ON / OFF switch. 

8.5 

Continuous mode 

To switch the machine to continuous mode, keep the on/off switch pressed and at the same 
time press the lock-on button (5). Subsequently release the on/off switch. 
To switch off continuous mode, press the on/off switch again. 

Never put down the machine when using the continuous mode! 

9  CLEANING AND MAINTENANCE 

Before performing any work on the equipment, pull the power plug. 

9.1 

Cleaning 

 

Keep the ventilation slots of the machine clean to prevent overheating of the engine. 

 

Regularly clean the machine housing with a soft cloth, preferably after each use. 

 

Keep the ventilation slots free from dust and dirt. 

 

If the dirt does not come off use a soft cloth moistened with soapy water. 

 

Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may 
damage the plastic parts. 

9.2 

Maintenance 

Our machines have been designed to operate over a long period of time with a minimum of 
maintenance. Continuous satisfactory operation depends upon proper machine care and 
regular cleaning. 

 

 

Содержание POWERPLUS POWC10200









Отзывы: