VARO PowerPlus GardenPro POWXG90425 Скачать руководство пользователя страница 4

 

POWXG90425 

EN

 

Copyright © 2018 VARO 

P a g e

 | 

4

 

www.varo.com 

4  ADDITIONAL SAFETY INSTRUCTIONS FOR HIGH-PRESSURE 

CLEANERS 

 

The appliance is designed solely for outdoor private use and NOT for commercial use. 
Please keep it away from heat, direct sunlight, moisture and rain, frost and sharp edges. 

 

Do not let people who have not been trained in the use of a high pressure washer nor read 
the instruction manual operate the machine! 

 

High pressure cleaners shall not be used by children or untrained personnel. 

 

Children should be supervised to ensure that they do not play with the appliance. 

 

Before starting up your machine please check it carefully for any defects. If you find any, 
do not start up your machine and contact your local distributor. 

 

Check especially the insulation of the electric cable should be faultless and without any 
cracks. If the electric cable is damaged, an authorized local service centre should replace 
it. 

WARNING: High pressure jets can be dangerous if subject to misuse. The 
jet must not be directed at persons, live electrical equipment or the 
appliance itself. 

WARNING: Do not use the appliance within range of persons unless they 
wear protective clothing. 

 

Do not direct the jet against yourself or others in order to clean clothes or foot-wear. 

 

Hold the spray lance firmly with both hands.  

 

The operator and anyone in the immediate vicinity of the site of cleaning should take 
action to protect them from being struck by debris dislodged during operation. 

 

Wear goggles and protection clothes during operation. 

 

Disconnect from electrical power supply before carrying out user maintenance. 

 

To ensure appliance safety, use only original spare parts from the manufacturer or 
approved by the manufacturer. 

 

Do not use the appliance if a supply cord or important parts of appliance are damaged, 
e.g. safety device, high pressure hose and trigger gun. 

 

Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it 
immediately. Do not put it in water. 

 

Tires and tire valves may be damaged by the high-pressure jet and then burst. 

 

Never use the machine in an environment where there could be a danger of explosion. 

 

It is not allowed to clean asbestos- containing surfaces with high pressure. 

 

This high pressure washer must not be used at temperatures below 0°C  

WARNING: High pressure hoses, fittings and couplings are important for 
the safety of the appliance. Use only hoses, fittings and couplings 
recommended by the manufacturer. 

WARNING: Inadequate extension cables can be dangerous. Cables on reels 
should always be completely unwinded to prevent the cable from 
overheating. 

 

If an extension cable is used, the plug and the socket must be waterproof and comply with 
the below-mentioned requirements for length and cable dimensions. 

 1.0 mm² max. 12.5 m 

 1.5 mm² max. 20 m 

Содержание PowerPlus GardenPro POWXG90425










Отзывы: