POWXG30030
EN
Copyright © 2015 VARO
P a g e
|
6
www.varo.com
7
ASSEMBLY
The trimmer is supplied with some components which need to be assembled. Please
proceed as follows:
7.1
Safety guard assembly and Edger Wheel assembly
Fix the safety guard to the trimmer head making
sure the sides are located into the grooves on the
trimmer head.
Secure the safety guard and edger wheel onto the
trimmer head with the 4 screws provided
.
Warning: the guard has a very sharp cutting edge on 1 side for cutting the
nylon line.
WARNING!
Never operate the tool without the guard properly in place. Use of the
unit without having installed the guard will cause the motor to overheat, and void
the warranty
.
7.2
Auxiliary handle assembly (see fig A)
Note: This may already be pre-fitted to the trimmer. However the following instructions give full
assembly details
1. Push auxiliary handle knobs on both sides .
2. While pushing the knobs, slide the handle on to the handle bracket assembly located on
trimmer’s shaft. (once the auxiliary handle is placed in position, the knobs can be released).
To adjust : Push on the auxiliary handle locking knobs (see fig a).
The auxiliary handle’s bracket can be moved up or down on the shaft and the auxiliary handle
itself can be moved forward or backward into 5 different locked positions (fig b) while knob is
pushed.
Lock by releasing the knobs, to fix handle in the desired height.
