Variquest Trifecta 800, Быстрый старт

Страница: 4 / 4

TECHNICAL SUPPORT
MAIN
TEST_PRINT.G
VASE.G
BRACELET.G
YOUR_PRINT.G
STARTING A PRINT
From the main menu, turn the dial to scroll to Print.
Push down on the dial to select.
1
Scroll down to the file you want to print and push
down again to start the print.
2
Temp Print
MAIN
MENU
Status Axis Wizard
Whenever you begin a print, always check that the first layer of the print is properly stuck onto the blue painter’s tape. A
properly leveled bed should have the extruded filament a bit squished and shouldn’t pop off the bed easily. While the
printer is performing the skirt nozzle purge, observe the deposited filament and make micro-adjustments with the thumb-
screw if necessary.
TOO CLOSE LEVELED TOO FAR
For technical assistance, please contact your authorized VariQuest dealer or the VariQuest Technical Support team:
• Email: techsupport@variquest.com
• Phone: 1-800-328-0585
© 2015 Varitronics®, LLC. All Rights Reserved. Y2900354 8/2015