Make sure the printer is located
near an accessible power outlet.
Use a box cutter to trim along the taped edges and peel back the outer box flaps.
The Trifecta™ 800 3D Printer can be too heavy to lift out of the box by yourself. Ask for help
to prevent injury or damages to the printer.
Make sure you have a pair of scissors handy to remove straps that fasten down printer
components during shipping.
UNBOXING TIPS
Open shipping box and remove the compartment lid.
1
Remove foam bracket and take out the printer and filament.
2
Remove printer accessories from the compartment.
3
Trifecta
™
800 3D Printer
SD Card
USB Cable
Power Cable
Print Bed Clips x4
Glass Print Bed
Hex Wrench
Trifecta™ 800 Printer
Filament Spool
Place the printer on a firm flat surface.
5
Remove the printer and filament from the box.
4
Place the Trifecta™ 800 3D printer and PLA filament
in a moisture-free and low dust environment.
Store opened spools of filament in a sealed bag with
a desiccant packet.
