Variquest Perfecta 3600STP, Руководство пользователя

Страница: 135 / 231

VariQuest
®
Perfecta™ 3600STP
User’s Guide 5-13
Printer Maintenance
Move or Store the Printer
Return to Default Calibration
Returning to the default calibration sets all the corrections made by the paper advance
calibration to zero. To return to the default paper advance calibration value, you must
reset the calibration.
1. Swipe down the dashboard on the front panel and touch ,
2. Scroll down and touch Image Quality Maintenance > Paper advance
calibration > Reset ready paper calibration .
3. Wait until the front panel displays the operation has completed successfully.
Move or Store the Printer
Your printer can be disassembled from the stand to move it. Use the blue knob to
perform this operation. If you need to move or store the printer, prepare it correctly
to avoid possible damage to it.
To prepare the printer for moving or storing:
1. Do not remove the ink cartridges or printhead.
2. Remove any loaded paper.
3. On the left of the front panel, press
Power to turn off the printer.
4. Unplug the power cord connected to the printer.
5. Disconnect any cables connecting the printer to a network or a computer.
CAUTION! CAUTION!
If you turn the printer upside down, ink could escape into the printer and cause
serious damage.
Note: When the printer is turned back on, it takes about three minutes to
initialize itself and to check and prepare the printhead. Preparing the printhead
normally takes just over a minute. However, if the printer has been off for a six
weeks or more, preparing the printhead could take up to 45 minutes.
CAUTION! CAUTION!
If the printer remains off for a long period of time, the printhead may become
unusable. In this case, you need to replace the printhead with a new one.
TIP
Preparing and purging the printhead uses both time and ink. To maintain the
printhead health, we strongly recommend that you leave the printer on or in sleep
mode, whenever possible. In both cases, the printer will wake from time to time to
maintain the printhead. Thus you can avoid going through lengthy preparation
processes before using your printer.