Page
4
VariQuest
®
Perfecta
®
STP Series
Quick Start
2. Load sheets of paper into the tray with printed side facing outward. Ensure that
the sheets are all the same size.
3. Adjust tray to fit width of paper.
Connect DC2300 to Perfecta
®
STP Series Printer
Before printing from the Design Center to the
Perfecta® STP Series
printer, you
must first set up
the Design Center software and the
Perfecta STP Series
printer.
Note:
For further instructions on connection methods, please visit the User's Guide
at
Select a Connection Method
Follow the tree chart to help identify what connection method is best for you.
Still not sure which connection is best for you or looking for more information on
each connection method? Review the chart to the right for more details.
Wi-Fi Direct -
Method 1
Note:
Easy to install - instructions on page 5
Wi-Fi Direct is a connection that allows for device-to-device communication,
linking devices together without a network.
Uses
• No IT required
• No additional cords required
• Printer and Design Center are off the network
Do not use if…
• You would like to access the internet and or use Google Drive
• Print from multiple locations across the school
Medium difficulty to install - instructions on page 5
• Access to school network and internet access with Google Drive
• Additional cords may be required
• If you do not want IT involvement
• If you do not want the printer to be discovered by others on the network
Wi-Fi Direct between Perfecta and DC with DC Ethernet to
Medium difficulty to install - Access the User's Guide, located at
Requires additional ethernet cord (not included)
• Access to school network and internet access with Google Drive
• Printer is off the network and not discoverable without a password
If you do not want IT involvement
Direct Wired Connection -
Method 4
Note:
Most difficult to install - Access the User's Guide, located at
resources.variquest.com
Requires additional ethernet cord (not included)
Uses
• Printer and Design Center are off the network
• You are having difficulty keeping a strong connection between the Perfecta STP
Series Printer and Design Center
Do not use if…
• If you do not want IT
[3]
[2]
