Perfecta
®
2400STP
Assembly Instructions
Page
3
Assemble Printer Stand
1. Fix one foot to a leg with 4 screws.
2. Repeat the process for the other foot and leg.
3. Place the foam removed previously on the floor and place cross
brace on top, making sure the yellow plastic parts are facedown.
4. Place leg into slot on cross brace with long side of foot as shown.
5. Attach leg to cross brace with 3 screws at the inside of leg.
Important
Do not fully tighten the screws.
6. Slide foam to the opposite side and place the other leg into the slot
on the cross brace.
Important
Make sure the 2 basket supports are on the same side.
7. Attach the leg to the cross brace with 3 screws on the inside of the
leg.
Important
Do not fully tighten the screws.
8. Turn the stand upright.
