VARIPROP REMOVAL
or their approved service centres.
Disassembly and reassembly require special tools and technical know-how only available at the factory
Never dismantle the VARIPROP yourselves
!!
NOTE:
Never use a hammer to remove the prop from the taper!
bolt against the shaft until the VARIPROP comes off the taper.
4.)
Now screw the hexagonal head bolt into the nut and turn the
(2)
the hexagonal head
bolt
(1)
The puller nut
and
The system includes only two parts:
be ordered separately.
The puller system is NOT included with the VARIPROP. It must
2.)
Remove both lock pins (3) and the prop nut (4, see page 2)
anode holder with zinc anode.
1.)
In order to remove the Variprop you must first remove the
3.)
Screw the puller nut
completely
into the hub.
F82 VP DF190 Installation Instruction Rev 10.pdf
Stand:02/02/2023
9
