VARIOBOTIC VA-Art-00018, Руководство по эксплуатации

Страница: 18 / 62

Safety
Operating instructions
Page 18 of 62 VarioShaker 270 with control box
It
e
m
n
u
mbe
r:
V
A
-A
rt
-00018
|
V
e
rs
io
n
:
0
5
/2
0
1
9
_
e
n
2.3 User / operating company obligations
Safety when handling the product can only be guaranteed if all required measures
were taken.
The user’s due diligence includes the planning of these measures and
inspecting their execution on the product.
In particular, the user shall ensure that:
▪
the product is only used properly and there is no misuse of the product.
▪
the product is only used in a proper, functional state and the functionality is
inspected.
▪
the required personal protection equipment is provided and worn by the
personnel for all work with the product.
▪
the operating manual is always in a legible state and completely available at all
times where the product is being used.
▪
only qualified and authorized personnel operates the product.
▪
only qualified and authorized technical personnel with specific training repairs,
maintains and performs improvements to the product.
▪
the personnel is instructed about the requirements for work safety and
environment protection on a regular basis.
▪
that the personnel used has read and understood the operating manual.
▪
all safety and warning notes installed on the product are not removed and are
easily legible and clear at all times.
▪
a hazard analysis according to the operating safety order (BetrSichV) or
corresponding provisions must be executed before commissioning. This risk
assessment must be documented.
2.4 Personnel obligations
Work with the product may only be performed by reliable, qualified and trained
personnel. The manufacturer recommends regularly extending and refreshing this
knowledge.
▪
Observe the legally permissible minimum working age!
▪
People who have been assigned to work with the product must have read and
understood the operating manual before beginning their work.
▪
The basic provisions on work safety and accident prevent, such as wearing
designated personal protection equipment, apply to all people who work with
the product.
▪
The personnel has the obligation to immediately inform superiors of any
determined faults and damage to the product. Work with the product must be
stopped until the damage has been repaired.