Vario Systems Osprey 460e, Руководство по установке

Страница: 7 / 12

Osprey 460e AV Option Installation Guide
Osprey 5
4. Locate Audio pin 1 on the A/V option board (Figure 6).
Figure 6. A/V Option Board
5. Locate the arrow at the other end of the ribbon cable. Align this arrow to Audio pin 1 on the
A/V option board.
6. Connect the ribbon cable by pressing down firmly.
7. Repeat steps 1 through 6 for video.
Make sure the ribbons do not cross.
Figure 7. Complete Assembly
Note: The recommended procedure is to install the driver software prior to installing the Osprey
video capture card in the computer. As soon as you install an Osprey card in the PC, the card
and its drivers are detected automatically.
8. Install the driver and follow the prompted instructions.
9. Turn off the computer and install the Osprey 460e or 450e and the A/V Option Card.
WARNING!: Be sure to install the card in the PCI Express slot. This slot is usually
black. Refer to Figure 8 as a guide. Placing the card in the wrong slot can damage the
card.
Audio
Pin 1
Video
Pin 1