2
K
Recommended working speeds:
•
Position 1-2:
Low speed
Kneading
•
Position 1-3:
Medium speed Mixing
•
Position 1-5:
High speed
Whipping
Introduction to the mixer:
TEDDY is a small professional mixer for kneading, mixing and whip-
ping in all environments where professional equipment is required.
Any operation of the mixer is made by means of the rotary knobs
on the sides of the mixer. The two knobs can be used simultane-
ously or individually and are used both for speed regulation and
as opening/closing function.
Connection to power:
The enclosed cable must be used.
The mixer must be connected to ground!
•
Only single phase power supply with ground must be used
for the mixer. Use the enclosed cable.
•
A plug with 2 pins + ground must be used.
•
Check that the voltage of the power supply corresponds
the voltage printed on the rating plate placed in the bottom
of the mixer and stated on the packing.
•
The mixer must be protected by a differential circuit breaker
and a fuse of max. 10 A.
A fuse is built into the cable plug.
The power characteristics of the mixer:
ACCESSORIES:
As standard the mixer comes with the following accessories:
•
Bowl in stainless steel.
•
Snap-in splash guard.
•
Ingredient chute.
•
Dough hook in stainless steel for kneading of dough.
•
Beater in stainless steel for mixing.
•
Whip in stainless steel for whipping.
B
Housing of the planetary gear
C
Bowl screen in stainless steel
D
Bayonet shaft
E
Lid
F
Upper part
G
Ingredient chute
H
Rotary knobs (two pcs.)
I
Base
J
Bowl in stainless steel, contents 5 quarts
K
Locking arm
Hook
Beater
Whip
Bowl
Ingredient chute
Fig. 1 The construction of the mixer
Fig. 2 Recommended working speeds
Supply
Output Frequency Voltage
Motor Power
voltage (V)
(W)
(Hz)
(A)
(hp)
115
300
50/60
3.4
0.4
Splash guard
