manualshive.com logo in svg

Varimixer V100PL, Руководство по эксплуатации, Страница: 5 / 44

Поделиться
Скачать
Varimixer V100PL Скачать руководство пользователя страница 5

5

Wire Color Codes

White-Phase 1

Red  -Phase 2

Black-Phase 3

Green-Ground

No Neutral is used

1. Lower the bowl using the bowl lift lever or pres 

the button for bowl lift on the front panel. 

4. Close bowl screen and raise 

the bowl arms into the up      

position.

5. Set timer to 10 minutes and 

push “start” .

6. Insure cover is rotating in 

the correct direction.

2. Open the bowl screen. 3. Remove the bowl 

and tools.

 Read this page entirely BEFORE beginning installation

.

INSTALLATION INSTRUCTIONS

UNDER NO CIRCUMSTANCES ARE THE SPEED LEVER, BOWL LIFT LEVER, OR THE BOWL 

ARMS TO BE USED TO MOVE THE MIXER INTO PLACE. DAMAGE WILL RESULT TO THE UNIT. 

IT IS RECOMMENDED THAT THE TOP LID BE REMOVED BEFORE MOVING THE UNIT.

The mixer must be mounted with the rubber feet, which neutralize both shaking and rusting. 

Spacers can be inserted under the mixer’s feet if the floor is uneven. The mixer can be bolted to the 

floor if desired.

Before the mixer is connected to power, it should be checked that the voltage and frequency on the 

rating plate is correct in relation to the place of installation. The rating plate is located on the rear 

right side of the mixer. The electrical connection box is located at the top rear of the mixer.

WARNING

Electrical and grounding connections must comply with applicable portions of the National Electrical 

Code and/or other local electrical codes.

Содержание V100PL













































Отзывы:

Нет отзывов