3
Transport:
Lifting equipment should always be used to move the machine.
The machine must not be pulled or lifted by the bowl lift handle.
When the machine is moved, it should be in a vertical position at all times.
Installation and adjustments:
The ambient temperature around the machine must not exceed 45
o
C.
Level the machine by adjusting the feet, using the supplied 32 mm fixed spanner.
Electrcal connection:
Before the machine is connected to the mains, control that the voltage and frequency printed on the name plate
correspond with the installation location.
The name plate is positioned uppermost on the back of the machine.
The electrical installation circuit must be secured by a Residual Current Device:
RCD type A-SI
The mixer must be earthed. Failure to do so may cause -
Risk of electrical shock.
Damage to the machine.
Excessive electromagnetic noise, causing malfunction to the machine and interference to other devices.
User can connect machine if -
Cable with plug is delivered with the machine
Only certified electrician must connect the machine, if fixed cable without a plug is delivered with the machine
For the benefit of service staff, it should be clear to see when the mains plug to the mixer has been removed from
the socket in the wall.
Table model must be fixed to the
table it is placed on.
U
se the 4 threads (M10x1.5)-
placed in the bottom of the legs.
