Variant Vertex 60, Руководство пользователя

Страница: 4 / 46

4
VARIANT
FACTORY LTD.
GENERAL INSTRUCTIONS
This user manual (method statement)
is aimed at everyone who will be working
with the «VARIANT» product or system it
desupportingribes. It contains information on
how to set up this system, and proper use it.
All persons working with the product
desupportingribed herein must be familiar with
the contents of this manual and with all the
safety instructions it contains.
The customer is to ensure that the informa-
tion materials provided by «VARIANT» are
available to all users, and that they have been
made aware of them and have easy access to
them at the usage location.
Persons who are incapable of reading and
understanding this booklet, or who can do so
only with difficulty, must be instructed and
trained by the customer.
Always observe all construction safety
regulations and other safety rules applying
to the application and using of our products
in the country and/or region in which you are
operating.
In the relevant technical documentation
and formwork usage plans, «VARIANT» shows
the workplace safety precautions that are
necessary in order to use the «VARIANT»
products safely in the usage situations shown.
In all cases, users are obliged to ensure
compliance with national laws, Standards and
rules throughout the entire project and to take
appropriate additional or alternative workplace
safety precautions where necessary.
The customer is responsible for drawing up,
documenting, implementing and continually
updating a hazard assessment on every
construction site. This document serves as the
basis for the site-specific hazard assessment,
and for the instructions given to users on how
to prepare and use the system. It does not
substitute for these, however.
This manual can also be used as a generic
method statement or incorporated with a site-
specific method statement.
The equipment/system must be inspected
by the customer before use, to ensure that it
is in suitable condition. Steps must be taken to
rule out the use of any components that are
damaged, deformed, or weakened due to wear,
corrosion or rot.
The customer must ensure that this product
is erected and dismantled, reset and generally
used for its intended purpose under the
direction and supervision of suitably skilled
persons with the authority to issue instructions.
These persons' mental and physical capacity
must not in any way be impaired by alcohol,
medicines or drugs.
The equipment/system must be assembled
and erected in accordance with the applicable
laws, Standards and rules by suitably skilled
personnel of the customer's, having regard to
any and all required safety inspections.
Many of the illustrations in this user manual
show the situation during formwork assembly
and are therefore not always complete from
the safety point of view.
Combining our formwork systems with
those of other manufacturers could be, but
needs to be checked by customer compa-
tibility «VARIANT» product/system with other
independently under its responsibility.
It is not permitted to modify«VARIANT»
products because of a safety risk.
Only original «VARIANT» components
may be used as spare parts. Repairs may only be
carried out by the manufacturer or authorized
facilities.
We reserve the right to make alterations in
the interests of technical progress.