Vari Hurricane MaX F-580BiS, Руководство пользователя, Страница: 24 / 64

Hurricane MaX
2.2.2 N
OISE AND
V
IBRATIONS
L
EVELS
Description F-580 F-580BiS -
Declared 55 acoustic pressure emission level A at the operator's worksite L
pAd
(86+4) dB
(84+4) dB
-
Declared 56 acoustic output level A L
WA,d
(98+4) dB
(96+4) dB
-
Declared 57 cumulative value of the acceleration of vibrations transmitted to the
operator’s hand-arm a
hv,d
(4.7+2.4) m.s
-2
(7.1+2.8) m.s
-2
-
Table 13: Measured Noise and Vibrations Levels
2.2.3 S
AFETY
P
ICTOGRAMS
The user is obliged to keep the pictograms on the machine in a legible state and, in case of any damage, ensure their replacement.
Position: Number: Description:
Combined sticker (
Fig. 22
), which is
attached under the rear plastic cover on the
machine's frame
1 Before using the machine, read through these Operating Instructions.
2
When doing maintenance on the machine, disconnect the spark plug
connector.
3
It is forbidden to place your hands or feet into the operating area of the
cutting tool – risk of getting cut.
4
Risk of being hit by flying debris, cuttings, ejected items, etc. Other persons
and animals - keep a safe distance from the machine.
5 During work observe the maximum permissible slope for operation.
6 Use eye and hearing protection.
Separate sticker on the working tool cover.
(
Fig. 25 )
- Working tool rotation direction arrow – right (clockwise)
Sticker ( Fig. 23 ) on the control lever on the
right handlebar.
-
Starting the working tool drive:
0 = working tool not moving
1 = safety engaged
2 = working tool moving
Sticker ( Fig. 24 ) on the control lever on the
left handlebar.
-
Machine travel start:
0 = the machine is stationary
1 = The machine is moving
Sticker (
Fig. 21
) located on the working tool
cover side, right in the travel direction.
-
Prohibited space for other persons and animals. Minimum safe distance from
the machine.
Table 14: Safety Pictograms
2.3 B
ASIC
I
NFORMATION
2.3.1 U
SE OF THE
M
ACHINE
The F-580 series Hurricane MaX brush cutters are designed to eliminate tall stalk grasses during their dormancy up to the maximum
height of 80 cm in both maintained 58 and non-maintained areas, and woody plants 59 in forests and on meadows with the maximum
diameter of 1 cm. The areas must not feature any solid items in the growth or rougher terrain. The F-580 series brush cutters are not
designed for park growth trimming.
The F-580 series Hurricane MaX brush cutters are designed as multi-purpose machines, the cutting blade with a cover may be
replaced with other adapters, for example, for mowing long grass for hay or surface cleaning. The recommended use of the brush cutters
with other adapters is described in the operating instructions of a given adapter. Attention, the
F-550 series Hurricane brush cutters are
single-purpose machines, and do not support any adapter change!

The use for purposes other than the intended purpose is; therefore, to be considered a use for an unspecified
purpose!
The machine may operate in all the inclined positions defined by the engine manufacturer, providing the operator is able to safely guide
the machine.
The protective devices comply with the requirements of ČSN EN 12733 a EN 12733 . These standards primarily take account of the
operator's safety since he cannot be hit by any stones or other objects thrown by the machine's rotating mechanism during the machine’s
regular travel. Therefore, the operator must always be in his regular control position, i.e. behind the machine, and with both hands firmly
holding the handlebars.

It is forbidden to remove any protective devices and covers from the machines
55 Measured per ČSN EN ISO 11201 under the conditions specified in ČSN EN 12733+A1, Annex B
56 Per ČSN ISO 3744
57
Measured per ČSN EN ISO 20643 under the conditions specified in ČSN EN 12733+A1, Annex C
58
The maximum height of freshly grown grass is limited to 40 cm. The area growth must be cut at least once a year!
59
The brush cutter is not designed to cut any continuous woody growth thicker than 5 mm! Any failure to observe this requirement will damage the machine!
24
Re
vi
ze
1
0/
20
19