Vari GLOBAL PJXP200, Перевод оригинальной инструкции

Страница: 24 / 60

PJXP200 / PJGCVX200 / PJCV224
LUBRICATION POINT IN SEASON AFTER SEASON LUBRICANT NOTE
Engine oil filling
status check
before each use
yes engine oil
change after first 10 hours (running-in of
the engine), then after 100 hours of
operation or after the season
Lower holder and arresting pin’s
head of the handlebars side
adjustment
as needed yes
oil
plastic lubricant
spray vaseline
Swivel holder pin of the handlebars
adjustment to sides
as needed yes
oil
plastic lubricant
spray vaseline
Thread of the tightening nut screw
of the handlebars height adjustment
as needed yes plastic lubricant
Accelerator Bowden cable lubrication as needed yes oil
Table 23: Lubrication intervals
2.7.2.3 Service intervals

Tighten regularly the handlebars elastic mount nuts and the upper joint nuts. They might become loose as the
result of the assembly operation. Loosening or loss of nuts may cause the machine breakdown with possible
injuries or damage to property of the operator or others.
Details of some service points are on Pict. 11 , marked like this . .
ACTIVITY IN SEASON AFTER SEASON
Oil level check 38 status check before each use
check and eventual fill to the MAX imum
level
Engine air filter check 39 before each use yes
The function of the safety switch before each use
Clutch plate lining check
each time the engine is mounted on the
gearbox or 1x a month
40
check, cleaning and degreasing
with visible signs of clutch plate wear check clutch lining on the driving unit
Tightening of the screwed connections
check before each use tightening
in the case of wear (damage) replace the screw connection with a new one
use original connecting components
Cleaning of the connecting flange
each time the engine is mounted on the
gearbox or 1x a month
41
degreasing
Cleaning of the connecting flange after each use yes 42
Lubrication - see 23
Table 24: Service intervals
38 Refer to the instructions for use for oil change intervals.
39 Refer to the instructions for use for air filter change intervals.
40
If the driving unit has been permanently mounted on the gearbox or adapter without being removed.
41
If the driving unit has been permanently mounted on the gearbox or adapter without being removed.
42
Dismantle the starter after the season and clean the the engine cooling fan - see the instructions for use of the engine.
24
R
ev
is
io
n
1
0
/2
0
2
1
SERVICE