Vari CB-80, Перевод оригинальной инструкции

Страница: 23 / 60

CB-80 CB-80B CB-80Z CB-80ZI
2.2.2 Noise and vibration reference values
Description CB-80 CB-80B
CB-80Z
CB-80ZI
Declared emission sound pressure level A at operator’s work station 42 L
pAd
(82+4) dB
(83+4) dB
(84+4) dB
Declared sound power level A 43 L
WA,d
(96+4) dB
(97+4) dB
(98+4) dB
Declared vibration total value of hand-arm transmitted vibration 44 a
hv,d
(8,8+3,5) m.s -2 (9,7+3,9) m.s -2 (22+8,8) m.s -2
Table 11: Sound and vibrations
2.2.3 Safety labels
The user must keep safety labels on the machine in legible condition and secure their replacement if damaged.
Location: Number: Description:
Combined sticker ( Fig. 27 ), which is glued
underneath the rear plastic cover on the
machine frame.
1 Read carefully through the user manual before using.
2 Disconnect the spark plug cables prior to undertaking repairs.
3 Avoid placing hands or feet in the blade operating area – risk of cutting.
4
Risk of injury from flying debris, shavings, ejected objects, etc. Keep persons and animals at a
safe distance from the machine.
5 Do not exceed the maximum permitted slope incline when operating the machine.
6 Use a protection of your eyes and hearing.
Sticker ( Fig. 29 ) on the right handle
control lever.
-
Drive activation of the work tool:
0 = work tool off
1 = work tool rotates
Sticker ( Fig. 28 ) on the left handle control
lever.
-
Engages the machine drive:
0
= drive off
1
= drive on
Table 12: Safety labels
2.3 Basic information
2.3.1 Use of the machine
Sweeping brush CB-80 is intended for cleaning flat, artificial finished surfaces 45 covered with dirt or freshly fallen snow up to a height of
3 cm 46 .

It is prohibited to use the machine on roads of all classes, except for perpendicular crossing where it is allowed.

Before using the machine it is always necessary to check that the bristles of the cylinder sweeping brushes are
not damaging the surface of the area being swept!
The OR-80 dozer blade 47 can clear freshly fallen blanket of snow up to 10 cm high. For collecting debris we recommend using the BS-80
tipping collector 48 , while working in places where there is a danger of damage to property or injury to other people we recommend using
the AP-80 dust screen 49 .

Alternate use of the machine for a different purpose should be considered undesignated use!
42
Measured in accordance with ČSN EN ISO 11201
43 In accordance ČSN EN ISO 3744
44 Measured in accordance with ČSN EN ISO 20643
45 e.g. concrete or bituminous surface, concrete or granite pavement, floors from cast materials, etc.
46 In independence on the type of snow. While removing the snow a certain amount of it can get on the cleaned surface through the space behind the sweeping rollers. This is quite
normal and does not give a reason to claim a malfunction of the machine.
47
Separate accessories are available as optional extra and are not part of the basic equipment of the machine!
48
Separate accessories are available as optional extra and are not part of the basic equipment of the machine!
49
Separate accessories are available as optional extra and are not part of the basic equipment of the machine!
23
re
vi
ze
1
2/
20
15