Vari Adela 190, Инструкция по эксплуатации, Страница: 21 / 36

BDR-595 GMI Adela 190
21
6.6 Diagnostics of driving problems.
Wheel drive gear
clutch does not switch-
off Improperly adjusted steering wire No rumbling must be heard from the
gearbox when manually turning the travel
wheel in counter-travel direction (wheel
gear switched off). Keep screwing in the
adjustment bolt No. 3 until the rumbling
sound disappears.
Broken release spring Contact a service shop
Wheel drive gear
clutch does not engage Another defect of the gearbox Contact a service shop
Problem Reason Remedial action
Cutting disk does not
turn Tightening pulley is not stressing
the belt properly Tightening pulley to be set by adjustment
bolt No. 2. (see Fig. 8)
Wire is fallen out from tightening
pulley lever Put the wire back to its place
V-belt is fallen behind tightening
pulley or down from belt pulley Put the belt back to its place
V-belt is broken Replace the V-belt with a new one
Excessive belt extension
(see Fig. 7) Replace the V-belt with a new one
Brake performance is
insufficient Brake wire is too stressed Set the wire so that it is slightly slack with
lever on the right handrail released – screw
in the adjustment bolt No.1
(see Fig. 8)
Brake cam lever is insufficiently
greased To be greased
Lining is worn out Contact a service shop
Hole for a possible
connection of wire hook
Brake Bowden cable and
adjustment bolt No. 1
Brake Bowden cable and
adjustment bolt No. 2
Wheel drive clutch Bowden cable
and adjustment bolt No. 3
Figure 8: Bowdens and adjustment bolts