Vari-Lite
10911
Petal
Street
Dallas, TX 75238
1.877.VARILITE
fax:
214.647.8038
www.vari-lite.com
VL1100 TS / TI
VL1100 TS / TI
a u t o m a t e d e l l i p s o i d a l
r e f l e c t o r s p o t l i g h t
Tungsten Units
Specifications
The unit shall be an integrally designed, remote-controlled, automated ellipsoidal reflector
spot luminaire. An integral enclosure/pan tube supports the luminaire with provisions for
two hooks. The pan tube serves as an interconnection point for power and data. Low noise
fans provide forced-air cooling for internal components during extreme operating
conditions. The rear cap provides three-point lamp adjustment and easy access to the
lamp for replacement.
A dimmed lamp power cable, an AC input connector, and two, five-pin DMX512
compatible connectors (in and through) are provided. The unit can be controlled by a wide
variety of DMX512 consoles.
Each unit shall be equipped with a high-speed processor providing diagnostic and self-
calibration functions as well as internal test routines and software update capabilities. A
yoke arm mounted panel and display provide the user interface.
The unit shall contain unit contains three-phase stepper motors to provide movement of
the head through 540˚ in the horizontal plane (pan) and 270˚ in the vertical plane (tilt). The
luminaire calibrates to minimize hanging distances.
A zooming multi-element optical system provides continuous focus of gobo images for
field angles from 19˚ to 36˚. A super zoom function provides field angles to 70˚.
Independent control of edge is provided.
A CYM color mixing system shall be provided for a broad range of user color selection. A
variable diffusion stage shall also be included. This stage provides controlled reduction of
the contrast ratio of imagery and beam edges. The effect is a continuous transition from
spotlight to floodlight.
A six-position gobo wheel with five rotatable, indexable gobo positions and one open
position shall be included. A central bearing system in the gobo wheel shall reduce noise
and ensure smooth operation of the mechanism. Gobos are easily installed and removed.
(A wide selection of gobos are available from Vari-Lite.)
Framing shutter models contain four shutter blades that translate radially across the
beam. Each individual shutter is capable of translating to beam center while also rotating
±35˚. The framing shutter mechanism rotates as a unit ±45˚.
Iris models contain a beam size iris suitable for producing narrow beams and cropping
gobos.
A 50 kHz. drive system shall quiet all two phase motors in the luminaire both when
moving and static.
The unit is ETL and ETLc certified and CE marked. The unit's exterior finish shall be
available in black or white. Custom colors may be special ordered.
VL1100TS/TI_0
21511
Photometric Data*
VL1100 ERS - 1000W Tungsten Halogen (100V Lamp)
VL1100 ERS - 1000W Tungsten Halogen (115V Lamp)
19.5
27.0
37.0
70.0
(Super Zoom)
19.5
27.0
37.0
70.0
(Super Zoom)
19.5
27.0
37.0
70.0
(Super Zoom)
.344
.480
.669
1.40
.344
.480
.669
1.40
.344
.480
.669
1.40
14.5
20.0
26.5
30.0
14.5
20.0
27.0
31.0
14.0
20.0
26.5
30.5
.254
.353
.471
.536
.254
.353
.480
.555
.246
.353
.471
.545
151,300
85,700
44,400
21,400
146,200
82,000
42,700
20,700
127,400
70,200
36,300
17,580
VL1100 ERS - 1000W Tungsten Halogen (230V Lamp)
Notes:
* All data taken with seasoned light source at 20 hours of life.
1
Multiply distance by Tn to determine coverage.
To calculate center beam Illuminance (I), at a specific distance (D): I = cd
I
D2
— if (D) is in feet, (I) is in foot candles
— if (D) is in meters, (I) is in lux
26"
(66cm)
26.5"
(67.3cm)
34.5"
(87.6cm)
17.5"
(44.5cm)
Shown with accessories that are sold separately.
©2010 Philips Group. All rights reserved. Printed in the U.S.A. We reserve the right to change
details of design, materials and finishes. Specifications are subject to change without notice.
VARI
❋
LITE automated lighting equipment is made in the U.S.A.