Vari Lite VL4000 BeamWash Luminaire, Руководство пользователя

Страница: 85 / 120

M
ENU
S
YSTEM
: M
ENU
O
PERATION
4
0 2 . 9 7 0 4 . 6 0 0 2 0 1 7 M a r c h 2 0 1 5 67
Menu Tree
Figure 4-3 and Figure 4-4 on page 68 are graphical representations of the menu system.
Figure 4-3: Menu Tree Part 1
Address - value (1 thru 512) DMX Data**
Ch 1 - Intensity XXX (Value)
Ch 2 - Pan High Byte XXX (Value)
Ch 3 - Pan Low Byte XXX (Value)
Ch 4 - Tilt High Byte XXX (Value)
Ch 5 - Tilt Low Byte XXX (Value)
Ch 6 - Edge High Byte XXX (Value)
Ch 7 - Edge Low Byte XXX (Value)
Ch 8 - Zoom High Byte XXX (Value)
Ch 9 - Zoom Low Byte XXX (Value)
Ch 10 - Optic Style XXX (Value)
Ch 11 - Cyan XXX (Value)
Ch 12 - Yellow XXX (Value)
Ch 13 - Magenta XXX (Value)
Ch 14 - CTO XXX (Value)
Ch 15 - Col Whl 1 XXX (Value)
Ch 16 - Col Whl 1 Ctrl XXX (Value)
Ch 17 - Col Whl 2 XXX (Value)
Ch 18 - Col Whl 2 Ctrl XXX (Value)
Ch 19 - Gobo Whl 1 XXX (Value)
Ch 20 - Gobo 1 Indx High XXX (Value)
Ch 21 - Gobo 1 Indx Low XXX (Value)
Ch 22 - Gobo 1 Ctrl XXX (Value)
Ch 23 - Gobo Whl 2 XXX (Value)
Ch 24 - Gobo 2 Indx High XXX (Value)
Ch 25 - Gobo 2 Indx Low XXX (Value)
Ch 26 - Gobo 2 Ctrl XXX (Value)
Ch 27 - Animation Whl XXX (Value)
Ch 28 - Animation Indx High XXX (Value)
Ch 29 - Animation Indx Low XXX (Value)
Ch 30 - Animation Ctrl XXX (Value)
Ch 31 - Iris XXX (Value)
Ch 32 - Beam Shaping XXX (Value)
Ch 33 - Beam Shaping High XXX (Value)
Ch 34 - Beam Shaping Low XXX (Value)
Ch 35 - Prism XXX (Value)
Ch 36 - Prism Index High XXX (Value)
Ch 37 - Prism Index Low XXX (Value)
Ch 38 - Programming Control XXX (Value)
Ch 39 - Strobe Speed XXX (Value)
Ch 40 - Strobe Control XXX (Value)
Ch 41 - Focus Timing XXX (Value)
Ch 42 - Optics Timing XXX (Value)
Ch 43 - Color Timing XXX (Value)
Ch 44 - Beam Timing XXX (Value)
Ch 45 - Gobo Timing XXX (Value)
Ch 46 - Luminaire Ctrl XXX (Value)
Notes:
*Factory default setting.
**Channel and Dimmer information displayed simultaneously.
***Reboots entire fixture including processor.
# For use by authorized service technicians only.
- CONTINUED NEXT PAGE -
Configure
Pan / Tilt Movement Enable
Disable
Change Luminaire ID ######
Reset Defaults Are you sure?
Lamp Power
Lamp Hours
On*
# of hours
Reset Lamp
Hours
Are you sure?
Off
Power Up
Lamp On
Lamp Off*
Cal On
Head Motors Movement Enable
Disable
Display
On Time
30 Sec
5 Min
10 Min
Display
Orientation Auto
Up
Down
On
Lamp Level Standard*
Studio
Pan/Tilt Swap Pan/Tilt
Invert Pan
Off*
On
Off*
On
Invert Tilt Off*
On
DMX Mode 16-bit Enh*
16-bit
Fixture Status Fixture OK... or displays a list of
errors encountered during
calibration process or operation.
ReCalibrate Fixture Are you sure?
Service
#
Luminaire ID ######
Software Version MM/DD/YY HH:MM
Fixture Hours XXXXXX Hours
ReBoot Fixture*** Are you sure?
Crossload Software Send
Sending Version
XX/XX/XX XX:XX
Crossload
Complete
Service Settings
Set Tilt Cal
Diagnostics
Ballast Info
Fan Check
Board Check
Sensor Check
Debug
Lamp Strikes
# of strikes
Speed
Auto
Normal
Reduced
USB Update OS
Log File Download
Reset
List of Files or
No Card Inserted
Gobo Menu
Gobo 1 Offset
Gobo 2 Offset
Reset Gobo Offsets
Recalibrate Gobo
BeamShape Menu
BeamShape Offset
Reset BeamShape Offset
Recalibrate BeamShape
Prism Menu
Prism Offset
Reset Prism Offset
Recalibrate Prism