Vari Lite VL3500 SERIES, Руководство пользователя

Страница: 27 / 86

I
NSTALLATION
: I
NSTALLATION
P
ROCEDURES
2
02.9678.0019 0 31-July-2004 11
Installation Procedures
Hanging the Luminaire
The VL3500 series luminaire can be hung horizontally or vertically from any structure designed to
work with the type of load created by this moving luminaire. Two mounting bracket assemblies
(provided) are used to attach truss hooks or other mounting hardware as required. Many omp tible
truss hooks are available from different manufacturers for your particular needs.
A minimum of one hook per truss hook bracket is required. If mounting method oes not use truss
hooks, two attachment points per truss hook bracket are required. When attaching more than one point
on a single bracket, the attach points must be spaced as far apart as possible usin the supplied
mounting holes.
Install mounting hardware and brackets:
Step 1. Install truss hooks on two provided truss hook bracke as r quired.
Figure 2-1: Installing Truss Hooks
Note: Various types of truss hooks can be used. The Mega Claw truss hook (as shown in the example
above) as well as many other standard hooks, can be ordered separately.
Step 2 De rmine required configuration of bracket installation. Brackets may be installed in either
o ientation as shown.
Figure 2-2: Bracket Orientation Options
Bracket
Example Truss
Hook Installation
Mega Claw Truss Hook
(not provided)
Truss Hook Hardw re
(not provided)
Bracket
www.carlosmendoza.com.mx