manualshive.com logo in svg

Vari Lite VL2201, Руководство пользователя, Страница: 19 / 125

Поделиться
Скачать
Vari Lite VL2201 Скачать руководство пользователя страница 19

I

NTRODUCTION

 : A

BOUT

 T

HIS

 M

ANUAL

0 2 . 9 6 7 3 . 0 0 0 1   A

22 - May- 0 1

1

Introduction

About This Manual

This manual provides necessary information regarding product safety, installation, 
operation, and routine maintenance for VARI

❋

LITE® VL2200™ Series Spot 

Luminaires. Familiarizing yourself with this information will help you to get the most 
out of your luminaire.

WARNING:  

It is important to read ALL accompanying safety and installation 

instructions to avoid damage to the product and potential injury to yourself or others.

Additional Support and Documentation

A support webpage for the Series 2000™ luminaires is available at: 
www.vari-lite.com (connect to the Vari-Lite homepage and follow the Customer 
Support link to the Series 2000 Support Center).

A service manual is available for extended maintenance of VL2200 Series Spot 
Luminaires. This manual is available in both printed and electronic (PDF) formats.

■

VL2200 Series Spot Luminaire Service Manual (02.9673.0010).
- Troubleshooting, Component Replacement, Illustrated Parts Breakdown.

Note:  

Performing maintenance procedures contained in the VL2200 Series Spot 

Luminaire Service Manual may void the product warranty. Refer to the Vari-Lite, Inc. 
Limited Warranty card included in the shipping package for this VARI

❋

LITE® 

product.

For more information on DMX512 systems, refer to the following document available 
from United States Institute for Theatre Technology, Inc. (USITT).

■

Digital Data Transmission Standard for Dimmers & Controllers plus AMX 
192 Analog Multiplex Data Transmission Standard for Dimmers & 
Controllers. (A copy of Recommended Practice for DMX512 is included.)
USITT Inc.
Suite 5A, 10 West 19th St.
New York, NY 10011-4206 USA
Tel : (212) 924 - 9088 Fax : (212) 924 - 9343
www.usitt.org

Содержание VL2201






























































































































Отзывы:

Нет отзывов