Technical Manual: TM50567
Optica 30/40/50 series
Revision: 4.0
Date of release: 2019-01-23
40/56
www.vareximaging.com
Status LED color
The status LED (
30/40 Series only
) indicates the Collimator modes. The table below explains the
status LED indications.
During the POWER-ON self-test and normal OPERATING MODE, the collimator software can detect
fault conditions. For troubleshooting see §7.1.
Collimator
Mode
Color of the status
LED
Explanation of the color indication
POWER ON
Green, flashing,
frequency 1 Hz,
50% OFF
50% ON
No fault condition, the collimator is performing its power-ON self-
test.
OPERATING
MODE
Green
Collimator performs as expected.
ERROR
MODE
Red
or
Green, flashing,
frequency 1 Hz,
90% OFF
10% ON
A fault condition is detected. The collimator is not able to perform
as expected
For trouble shooting see §7.1
Functions during OPERATING MODE
The operating Collimator functions during OPERATING MODE can be found in the applicable
User
Manual
.
