VARDE OVNE Fuego 1, Инструкция по установке и эксплуатации, Страница: 9 / 22

9
Fresh air supply
A continual supply of fresh air is required in the
room in which the stove is situated. This can be
achieved by installing ventilation grids in the walls
and making sure they cannot be blocked. The
quantity of air used for combustion is approx.
14 m³/h.
Ignition air
When the upper low handel is pushed
towards left you open the ignition air.
This option is only used for lightning up.
As soon as the fire has a good grip—
rembermber to close again.
Tertiary air
Constantly added air, which makes the
stove burn even cleaner while lowering the
content of tar and soot in the combustion
process to an absolute minimum. At opti-
mum combustion settings, glass and com-
bustion chamber will be burnt completely
clean, and the amount of ash remaining
will be minimal.
Overheating
Occurs if too much wood is placed in the
stove or if too much air is added to the
combustion process.
Combustion air
damper
Push the damper
towards the right to
open.
Combustion /secondary air
Pre-heated air for the combustion process
(secondary air). The amount of air can be
adjusted according to needs. A high level
of chimney draught requires a lesser in-
take of combustion air.
Combustion air
damper
Push the damper
towards the left to
close.
Max height of firewood