T: 00352/26908036 – F: 00352/26908040
Varan motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
NEPW-02
SPECIFICATIONS
SPECIFICATIONS
Electrical Requirements
120V-230V / 50HZ-60HZ
Fluid Capacity
20 Gallons
Maximum Flow
5.28 Gallons per Minute
Fusible Link
Tested at 185° F.
LIST OF CONTENTS
Description
Q'ty
Middle Shelf
1
Parts Washer Tank
1
Pump with Cord and Switch
1
Support Legs
4
Swivel Casters
4
Work Basket
1
ASSEMBLY
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please
call Harbor Freight Tools at the number. Shown on the cover of this manual as soon as possible.
INSTRUCTIONS FOR PUTTING INTO USE
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
▲
WARNING
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before assembling
or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near
the end of this manual.
Assembly
1. Assemble the four Legs (13) to the Shelf (12) using Pan Screw (14) Washer (8) and Nut (9). Tighten loosely.
2. Attach the Legs / Shelf assembly to the Body (7) using Screw (14) Washer (8) and Nut (9). Tighten securely.
3. Tighten the Fasteners holding the Shelf (12) to the Legs (13) securely.
4. Attach the Casters (37 and 38) to the Legs (13) using Washers (39) and Nuts (40). The Locking Casters (37) should
be installed on the front of the tool, where they can be easily reached.
5. Install the Pump Assembly (18) on the inside of the Body (7) using Screws (22), Washers (31 and 32) and Nuts
(31). Ensure that the Switch Box (21) and Electric Cord (19) are on the outside of the Body (7). Tighten fasteners
securely.
