Varan Motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
T: 00352/26908036 – F: 00352/26908040
5734-S26
STEP-3
Install the monitor brackets onto the back of the panel TV: screw four bolts into the holes in the back of the panel TV.
Make sure the distance from each bracket to the top of the panel TV is equal, and also as center as possible. The parts
shall be selected according to the dimensions of the holes in the back of the panel TV.
STEP-4
Loosen the knobs to adjust the angle of the LCD between -15° - + 15° to a suitable position, and screw the knobs up.
Wood Stud Mounting:
The wall plate must be mounted to two wood studs. Use a high quality stud sensor to locate two adjacent studs. Once
you find the studs and have made the mounting location, you are ready to put up the wall mount. The wall mount will
need to be screwed into the wall stud at as many points as possible.
